High-performance adsorption analyzer for measuring surface area, pore size, and pore volume of powders and particulate materials equipped with 3 high-resolution ports. The 3Flex is ideally suited for gas or vapor adsorption analysis of microporous (< 2nm) and mesoporous (2 to 50nm) materials and...

The BELSORP MAX II is a versatile instrument which measures specific surface area/pore size distribution, vapor adsorption and chemisorption. It allows for comprehensive surface characterization such as micropore analysis by measuring adsorption isotherms from extremely low pressure, or...

Bragg-Brentano in a goniometer with θ/2θ geometry. 1.5 kW X-ray tube with Fine Focus type copper (Cu) anode. Automatic sample exchanger, ASC-8. D/teX Ultra 1D Si Strip Detector equipped with a graphite monochromator.

FT-IR Spectrometer featuring two detectors (DTGS & MTC) with two beam splitters capable of measuring a spectral range of 7500-50 cm-1. Besides the standard transmission measurement mode, reflection (IRRAS) and attenuated total reflection (ATR) modes are also available through a VeeMAX II...

The TGA 550 offers users the flexibility to add advanced features such as high-resolution TGA, MTGA, DTA signal and a new 25-position autosampler. The performance, flexibility and ease of use make it an excellent TGA for research and multi-user laboratories where a wide variety of TGA experiments...

The Discovery V8 Stereo microscope, from ZEISS, allows samples to be observed between 10x and 80x magnifications, thanks to the lens, eyepieces, and manual zoom of the microscope. In addition, it has attached an 8 MPx camera connected to a 14-inch monitor with FullHD resolution, which allows the...