Carboltie Gero Laboratory Ovens are devices that can meet the precise temperatura control and temperatura uniformity requirements for the synthetic laboratory work. It is used for a wide range of applications such as drying, evaporating, curing or in our case synthesis of MOFs. Depending on the...

This platform allows to automatically dispense virtually any liquid / solid into any type of container. The GPU-P gravimetric dispensing unit reduces dosing times (typically 20 sec for 1 g depending on powder flow properties) with a 10 µg resolution. Liquid handling in powdered by 4 syringe pumps...

Creality Ender 3S1 3D printer with FDM (Fused Deposition Modeling) technology with a printing volume of 220 x 220 x 270 mm. It can print with a resolution of 160 µm on the Z axis and 150µm on the XY axis. It is equipped with a printing bed that can be heated to up to 100oC. It supports the most...

The vacuum oven is used to dry and activate samples under vacuum or under nitrogen atmosphere. It is used for applications requiring heating and vacuum conditions. It has an inner volume approx.. 25 L, it can operate with temperatures above 200ºC, the possible vacuum is up to 0.01 mbar. The oven...

Nutsche filtration is a batch filtration technique that operates within a sealed vessel utilizing vacuum or pressure. This process involves passing liquid through a filter plate equipped with a suitable filter media, facilitating immediate discharge of solids.

ElectraSyn 2.0 is a three-in-one device that runs electrosynthesis, cyclic voltammetry (CV), and room temperature stirring. to run a simple CV and explore the substrate’s electrochemical properties; set up constant current or constant voltage reactions in the most intuitive way.

It is a dual rate infusion/withdrawal pump from KD Scientific which consists in two pumps in one by having two independent pumping channels linked through hardware and software where you can infuse or withdraw simultaneously at different rates; or infuse with one syringe and withdraw with the...

It is a single syringe containing a programmable touch screen that can infuse of withdraw with its pump. It can accommodate syringes from 0.5µl to 60ml. User can determine their flow rates with selectable target volume or time values to control the total infusion volume.

Memmert ovens are mainly used for carrying out the solvothermal synthesis of our materials. These ovens offer a temperature range up to +300ºC and can operate in forced air circulation conditions, contributing to the optimum temperature distribution on the inside. Moreover, different programs can...

The 8000D Mixer/Mill grinds up to 0.2 – 10 grams of dry, brittle samples, or mixes up to 50 mL of material per clamp. It reduces samples to analytical fineness and can be utilized for mechanochemistry, mechanical alloying, slurry grinding, blending powders and mixing emulsions