It is a single syringe containing a programmable touch screen that can infuse of withdraw with its pump. It can accommodate syringes from 0.5µl to 60ml. User can determine their flow rates with selectable target volume or time values to control the total infusion volume.

Memmert ovens are mainly used for carrying out the solvothermal synthesis of our materials. These ovens offer a temperature range up to +300ºC and can operate in forced air circulation conditions, contributing to the optimum temperature distribution on the inside. Moreover, different programs can...

High-performance adsorption analyzer for measuring surface area, pore size, and pore volume of powders and particulate materials equipped with 3 high-resolution ports. The 3Flex is ideally suited for gas or vapor adsorption analysis of microporous (< 2nm) and mesoporous (2 to 50nm) materials and...

The BELSORP MAX II is a versatile instrument which measures specific surface area/pore size distribution, vapor adsorption and chemisorption. It allows for comprehensive surface characterization such as micropore analysis by measuring adsorption isotherms from extremely low pressure, or...

Restek’s Pack in a Box kit is a complete column-packing system intended to pack your own analytical HPLC. The packing pump is electric, so no pressurized air is required. 10,000 psi maximum pressure.

Bragg-Brentano in a goniometer with θ/2θ geometry. 1.5 kW X-ray tube with Fine Focus type copper (Cu) anode. Automatic sample exchanger, ASC-8. D/teX Ultra 1D Si Strip Detector equipped with a graphite monochromator.

The 8000D Mixer/Mill grinds up to 0.2 – 10 grams of dry, brittle samples, or mixes up to 50 mL of material per clamp. It reduces samples to analytical fineness and can be utilized for mechanochemistry, mechanical alloying, slurry grinding, blending powders and mixing emulsions

The CombiFlash EZ Prep system from Teledyne ISCO is a dual function purification system that enables the user to perform both Flash and Preparative (Prep) purifications on the same instrument. The intuitive user interface of the PeakTrak software minimizes any learning curve, enabling the user to...

Extremely compact design integrating robust technical features and outstanding control performances. The Telstar benchtop freeze dryer has been developed to meet the most demanding requirements of a research freeze dryer. Selected features allow understanding of the most important parameters of...

FT-IR Spectrometer featuring two detectors (DTGS & MTC) with two beam splitters capable of measuring a spectral range of 7500-50 cm-1. Besides the standard transmission measurement mode, reflection (IRRAS) and attenuated total reflection (ATR) modes are also available through a VeeMAX II...